TheDIATEST TD-Gauge+ allows the simultaneous gauging of
thread depth and detecting of No-Go gauges.
With the DIATEST TD-Gauge+ you can use DIN-gauges of all
manufacturers. Thus you are not tied into a supplier who is
expensive or located far away, but you can choose the most
favourable provider among a variety of suppliers. DIATEST also
offers DIN-gauges that are assembled within the factory when a
complete thread depth gauge is ordered
The DIATEST TD-Gauge+ can be used with thread gauges as well as
with cylinder plug gauges. This offers a maximum flexibility in
handling for you, as you only have to exchange the related gauges
(which you can purchase from a DIN-Gauge manufacturer of your
choice e.g. DIATEST) thanks to the universal application of the
The DIATEST TD-Gauge+ is very ergonomically designed, the viewing
panel with the vernier always remains visible to the user when
the gauge is screwed in. You can conveniently and at any time see
the detected value. In the same viewing panel the pre- and post
decimal places can be read of simultaneously.
The possible reading accuracy is 0,05 mm, this is a very high
accuracy for a mechanical thread depth gauge, particularly
compared to the digital thread depth gauges that usually have an
accuracy of up to 0,01 mm, however, these are much more
You can choose an individual marking for the DIATEST TD-Gauge+.
This can be done directly at the factory provided that the order
is marked accordingly. Onrequest we can realize special depths
and stops at any time.
DIATEST TD-Gauges+ are exclusively manufactured by DIATEST,
the specialist for accuracy and precision in metrology. You have
the guarantee to receive high-quality products “Made in Germany”
and “Made by DIATEST”
DIATEST-products are not only sold all over the world, but we
also offer a worldwide after-sales and consulting service. You
are not alone with your problems or questions.
- Measures the thread depth with an accuracyof0,05mm
- Checks the depth quality using the Go/No-Go-gauge
- Available in gauging steel or hard-chrome plated
- Dirt groove as an option, recommended for Go-Gauge
- Available in four sizes
Cylinder plug gauge
- Measures the bore depth with an accuracy of 0,05 mm
- Checks the diameter using the Go/No-Go-gauge
- Available always in hard-chrome plated version
- Air groove as an option, recommended for Go-gauge
- Available in four sizes
For the DIATEST TD-Gauge+ you can in additon buy a universal
setting gauge. This universal setting gauge can be used for all
DIATEST TD-Gauges+(thread gauges and cylinder plug gauges) from
size 02 to 05.