Metrology » Inside and Outside Measurement » Dial Inside and Outside Measurement
Fowler 0.500" Pocket Thickness 52-545-000-0
• Can easily be adjusted to zero by turning the dial bezel.
• Frame of light, rust resistant aluminum. Measuring faces hardened, ground, lapped for accuracy. Spindle: hardened stainless steel.
• Length 2.5"; height 1.9"; thickness .535".
• Contact is flat with a .230"/6mm diameter
• Under two ounces and fits in a shirt pocket.
• Fraction to metric conversion chart on rear of unit.
• Includes case
Range: 0-.500″
Dial Reading: 0-100
Throat Depth: 0.500″
Graduation: 0—15—0
Length: 2.5″
Height: 1.9″
Thickness: .535″
More From Products Fowler
10Mm X 10Mm Edge Finder 52-575-035-0
0-40”/1000Mm Electronic Height Gage 54-106-040-0
0.7” - 1.5" Dial Bore Gage Set With Carbide Anvils 52-646-100-0
4 Piece Pin Vise Set 52-491-000-0
Axial Support Test Indicator Accessory 52-565-012
125-150Mm Outside Metric Micrometer 52-248-006-1
0-25Mm Swiss Style Micrometer 52-229-209-0
40X Pocket-Scope With .001” Reticle 52-662-040-0
1 - 2”/25-50Mm Snapmatic 53-666-501
18” Straight Edge 52-480-050-0
600Mm Satin Chrome Steel Rule 52-380-017-0
Bowers .250” - .750”/6 - 20Mm Xth Holematic Pistol Grip Set 54-566-620-0
3-4"/75-100Mm Point Anvil & Spindle Micrometer 54-860-664-0
8” Spring Divider With Quick Nut 52-116-008-0
0-6” Vernier Caliper With Fine Adjustment 52-058-016-0
0-1" Indi-X Indicating Micrometer 52-245-501-0
12.6”/320Mm Mini-Vertical Electronic Height Gage With Cast Iron Base 54-180-212
4Mm Probe Set For The -Trimos V3 - V6 Height Gages 54-199-105-0
8"/200Mm Ultra-Cal Iv Electronic Caliper 54-100-448-0
Bowers 2” - 4”/50 - 100Mm Xth Holematic Pistol Grip Set 54-566-100-0
0-40”/1000Mm Electronic Height Gage 54-106-040-0
0.7” - 1.5" Dial Bore Gage Set With Carbide Anvils 52-646-100-0
4 Piece Pin Vise Set 52-491-000-0
Axial Support Test Indicator Accessory 52-565-012
125-150Mm Outside Metric Micrometer 52-248-006-1
0-25Mm Swiss Style Micrometer 52-229-209-0
40X Pocket-Scope With .001” Reticle 52-662-040-0
1 - 2”/25-50Mm Snapmatic 53-666-501
18” Straight Edge 52-480-050-0
600Mm Satin Chrome Steel Rule 52-380-017-0
Bowers .250” - .750”/6 - 20Mm Xth Holematic Pistol Grip Set 54-566-620-0
3-4"/75-100Mm Point Anvil & Spindle Micrometer 54-860-664-0
8” Spring Divider With Quick Nut 52-116-008-0
0-6” Vernier Caliper With Fine Adjustment 52-058-016-0
0-1" Indi-X Indicating Micrometer 52-245-501-0
12.6”/320Mm Mini-Vertical Electronic Height Gage With Cast Iron Base 54-180-212
4Mm Probe Set For The -Trimos V3 - V6 Height Gages 54-199-105-0
8"/200Mm Ultra-Cal Iv Electronic Caliper 54-100-448-0
Bowers 2” - 4”/50 - 100Mm Xth Holematic Pistol Grip Set 54-566-100-0
Featured Clients