Contact Us
Metrology Wyler

Wyler BlueCLINO

BlueCLINO

The new inclination measuring instrument BlueCLINO is based on the well-proven CLINO2000 and has the following features:

  • Large and very easy-to-read color display
  • Various color profiles can be chosen
  • Various display methods such as bar graphs or spirit levels can be chosen
  • All current units can be indicated
  • High precision over the entire measuring range of ±60° with integrated temperature compensation
  • The internal software, together with a reversal measurement, a simple zero setting
  • Rugged housing, with prismatic bases made of either aluminum hard anodized or cast iron, nickel plated
  • The base on the right hand side can be used as a measuring base as well
  • Built-in cross vial for easy alignment of the vertical axis in order to avoid “twist errors”
  • The instrument is compatible with the full range of WYLER digital sensors
  • Powered by standard 1.5V batteries, rechargeable batteries or with mains adapter
  • Fulfils the strict CE requirements (immunity against electromagnetic smog)
  • The instrument can be adjusted to local gravitation
  • Options:
    • Radio transmission, based on Bluetooth technology
    • The instrument can be recalibrated with the help of simple calibration tools that are supplied together  with the instrument (option). This process is supported by the internal software
    • Magnetic inserts in the left hand vertical and bottom horizontal base possible
    • A fourth measuring base may be attached to the top of the instrument

     

  • Radio transmission, based on Bluetooth technology
  • The instrument can be recalibrated with the help of simple calibration tools that are supplied together  with the instrument (option). This process is supported by the internal software
  • Magnetic inserts in the left hand vertical and bottom horizontal base possible
  • A fourth measuring base may be attached to the top of the instrument

 

The inclination measuring instrument BlueCLINO is optionallly equipped with an integrated calibration set-up for a quick calibration procedure which enables the calibration without complex means. On the backside of the instrument precisely manufactured and placed holes are available for installing the dowel pins as calibration aids. These pins are part of the delivery and can be inserted into the holes. With the quick calibration method the values at + and - 45° as well as the exact zero value can be adjusted. By this procedure the instrument can be set to a sufficiently high precision for most of the applications. For more details see "VIDEOS/TUTORIALS".

Calibration Certificate

The BlueCLINO can be delivered with an internationally recognised Calibration Certificate against a surcharge

Quick calibration of the inclination measuring instrument BlueCLINO

MECHANICAL ENGINEERING

Measuring task / Goal:
With simple means the position of a cutting head can easily be checked and adjusted if necessary.

 

Alternatively to the new adjustment of the tool the table can be inclined and checked.

more

MECHANICAL ENGINEERING

Measuring task / Goal:
A huge bearing ring is being measured in the frame of the quality assurance scheme on several points in respect of the actual inclination.

more

MECHANICAL ENGINEERING

Measuring task / Goal:
Check of the adjustment angle of the tool on a large rotating lathe.

more

FORMULA 1 CAR RACING

Measuring task / Goal:
Periodical checks and adjustment of the wheel mounting, particularly the wheel rake. This check is performed between training laps to optimise the values for the actual race.

 

more

GOLF COURSES

Measuring task / Goal:
Some golf courses in England measure the flatness of the „Green“ in a simple way. A special vehicle has been constructed, on which two CLINOTRONIC are mounted in a right angles to each other.

 

Both are connected to a small printer. The green is checked according to a pre-set pattern and at each measuring point, after a short stop, the inclination angles determined in the two directions are recorded and printed.

more

CONTINEOUS CASTING / DIE TAPER

Measuring task / Goal:
The taper angle of continuous casting / dies shall be precisely measured and adjusted. Precise results shall be possible in the workshop, while preparing dies, as well as on the casting line where severe conditions are common. Weight to allow easy handling by 1 person.

more

RADIO ONCOLOG / CALIBRATION ON LINAC MECHANICS

Measuring task / Goal:
The small dimensions (100x75x30 mm) and the light weight (485 Gramm) together with the 4 precise measuring bases situated around the periphery, make the CLINOTRONIC Plus the ideal instrument for the calibration task. In order to calibrate the display of the gantry angle, the true angles at the 4 major gantry coordinates (180° / 90° / 0° / 270° / 180°) must be measured. For the calibration of the collimator rotation readout, the true angles at 45° and at 315° are to be measured. The CLINOTRONIC Plus can also be used to eliminate roll of the couch and to assure that phantoms are precisely horizontal.

more

MEASURING OF THE INCLINATION OF THE ROAD SURFACE

Measuring task / Goal:
The inclination of the road has to be measured continuously during the placement of the road surface to ensure that the inclination remains within the tolerances. The measurements have to be made by road workers at various temperatures (summer and hot tar) and under difficult light conditions (ranging from very bright to very dark).

 

Remark:
Illustration shows WYLER Clinotronic Plus mounted on a device available in USA under “Accu-Slope”, Pat# 8028433

more

ALIGNMENT OF SOLAR PANELS

Measuring task / Goal:
Solar panels have to be perfectly adjusted to the sun in order to ensure best possible performance.

more

 

  Manual BlueCLINO

  Catalog Chapter - BlueCLINO

  Flyer - BlueCLINO

  IMPORTANT PRODUCT INFORMATION for the Measuring Instruments
      of the BlueSYSTEM-Family     ... with Radio Equipment OBS433i

  IMPORTANT PRODUCT INFORMATION for the Measuring Instruments
      of the BlueSYSTEM-Family     ... with Radio Equipment OBS421i 


Featured Clients