Contact Us
Metrology » Optical Measurement » Vision Systems Oasis

Oasis CoreX2 Laser Micrometer

Product Details

Oasis Corex2 Size ChartIf your part fits Measure On

The CoreX2 has a Field of View of 3.40” x 2.80” allowing users to measure parts up to 3 3/8” in length and up to 2 ¾” in diameter to an accuracy of +/- 0.0002”. Working with a shadow (profile view) of the part, measurements are taken at a rate of 6 times per second. Just as fast as a user can place a part into the OASIS, every measurement on the part is instantly compared to dimensional tolerances and reports pass, warn or fail. Using OASIS-Link capabilities in the OASIS software, parts of up to 6 ½” in length can be measured and reported.

“The exciting thing about the CoreX2 is that it provides the same speed and ease-of-use that our other machines offer and nearly doubles the Field of View so that manufacturers of larger parts can now use OASIS in their shops”, said Jeff Palmer of George Products. “Customers asked for a larger machine and now we’re pleased to be able to offer it. Bigger truly is better.”

Like other OASIS Inspection Systems, The CoreX2 uses sophisticated edge detection and geometric recognition algorithms to automatically measure in real-time on the shop floor, making it faster, and more accurate than conventional methods. No matter how many dimensions are on the part, this machine inspects them all in a fraction of a second.


  • Larger Field Of View (FOV)
  • Accurate to +/– .0002 inches
  • Continuous Image Acquisition
  • Simultaneous Measurement of Multiple Dimensions
  • Automatic Inspection Reporting
  • User Friendly Full-Feature Software

Larger FOV:

The CoreX2 is over 185% larger than what until now was our largest Field of View.

Accurate to +/- .0002 inches

A Color-coded display panel shows the actual measured dimension and the user-defined upper and lower limits (tolerances). Pass/Fail indications are easily identifiable for all measurements using Green (Pass), Yellow (Warning) and Red (Fail).

Continuous Image Acquisition:

The CoreX2 captures images at a rate of 6 times per second utilizing an LED light source to collimate precise rays through a series of light diffusers and lenses that shine across a part to be inspected.

Simultaneous Measurement of Multiple Dimensions:

By casting a shadow of a part to be inspected and capturing that image in a digital format, the powerful software behind the scenes converts the captured image into real dimensional data. The image is captured in real time so regardless of the number of dimensions every time a part is placed in the Inspection Zone, each and every measurement is simultaneously and instantly updated.

Automatic Inspection Reporting:

Measurements taken by the CoreX2 are recorded as parts are inspected. Those dimesnions are imported into an Inspection Report which will create a custom report that can be printed or saved for future retrieval. The report can be created for the dimensions of a single inspected part or for a group of parts in an entire inspection run.

User Friendly Full-Feature Software:

Detailed part programs can be created in minutes using Vertical and Horizontal Edge, Circle and Angle Tools. Also in CoreX2 software Tapers, Gage Line and Offset Diameters can be also measured.


Execute two or more part programs in automatic sequence and have the data reported and saved in a common file.

Featured Clients