Contact Us
Metrology Wyler

Wyler nivelSWISS-D

nivelSWISS-D

The inclination measuring instrument nivelSWISS is well known and well established in the machine tool industry. nivelSWISS-D is the consequent further development of the classic nivelSWISS:

  • Stable cast iron body
  • Ergonomic handle supporting accurate measurement even on vertical surfaces
  • Well-proven measuring system
  • Digital display allowing the full utilization of the accuracy of the measuring system.  Furthermore, the digital and back-lit display allows excellent readability even under difficult light conditions
  • The display can be inclined to allow optimal readability from above
  • Simple integration into WYLER measuring systems: nivelSWISS-D can be connected to a PC/laptop with a USB cable. The instrument is powered from the USB-Port. The digital measuring data  transmission allows evalution with LEVELSOFT PRO or MT-SOFT
  • An infrared zapper facilitates the transfer of the measurement data to the Software

 

 

The nivelSWISS-D is the ideal symbiosis of the well-proven measuring system of the nivelSWISS and the simple handling of digital WYLER measuring systems.

 

Measuring technology:
Analog measuring technology with inductive probe system. The mechanical pendulum is friction-free suspended and has therefore the tendency to swing back to the vertical position. At the lower end of the pendulum a ferrite core is fastened, which penetrates a double winded coil fed by alternating current. Digital display of the measuring data.

nivelSWISS-D is available in two versions:

nivelSWISS-D HORIZONTAL VERSION

With a horizontal flat measuring base, equipped with slots for screwing onto special measuring bases (i.e. granite measuring bases) or on customers‘ own special measuring equipment. Mainly used for the adjustment or alignment of horizontal machines and for checking the flatness of machine tables and
guideways.

nivelSWISS-D ANGULAR VERSION

Equipped with two prismatic measuring bases in rectangular position to each other for measuring flat surfaces and shafts (diameters Ø 20 ... 120mm) horizontally or vertically.

The measuring faces are carefully hand scraped to obtain an extraordinary precision. This makes the nivelSWISS-D extremely suitable for adjustments or checks on rectangular geometrical components of machine tools and structures. Both versions allow the direct connection to a laptop with a USB cable.

Calibration Certificate

The nivelSWISS-D can be delivered with an internationally recognised Calibration Certificateagainst a surcharge

nivelSWISS-D connected to a laptop with the USB cable. The instrument
is powered from the USB port

nivelSWISS-D with external 24V power supply

nivelSWISS-D with external 24V power supply

STRAIGHTNESS

  • Measurement of granite straight edges
  • Measurement of machine tool guideways
  • Air plane configuration checking (under different loads)
  • General load depending geometrical elements

PARALLELISM

  • Measurement of machine tool guide ways
  • Measurement of geometry of machines
  • Adjustment of printing machine assembly
  • Adjustment of platforms

FLATNESS

  • Flatness of measuring and setting plates in laboratories and on the shop floor
  • Flatness of tables of machine tools
  • Flatness of connecting surfaces of assemblies and subassemblies

SQUARENESS

  • Measurement of  machine tool guideways 
  • Measurement of master squares
  • Measurement of angular deviation between spindle and other elements of a machine tool

MACHINE TOOLS / ROTATION CHECKS

Measuring task / Goal:
A machine tool must be checked on possible geometrical deviations. The check must show up eventual rotations of the table during displacement. The measurement of geometry should be made in a quick, reliable and simple procedure ant thus with a good cost-benefit effect.

more

MACHINE TOOLS / ROTATION CHECKS

Measuring task / Goal:
A machine tool must be checked on possible geometrical deviations. The check must show up eventual rotations of the table during displacement.

The measurement of geometry should be made in a quick, reliable and simple procedure ant thus with a good cost benefit effect.

more

MEASURING - CALIBRATION / FLATNESS MEASUREMENT, ANGLES

Measuring task / Goal:
The calibration of granite master squares should be performed as easily and efficiently as possible. The equipment used should offer a good cost-benefit relationship and requirements regarding the qualification of staff should be as moderate as possible, enabling workshop staff to easily make use of the system.

more

MEASUREMENT OF THE ABSOLUTE POSITION OF A GUIDEWAY

Measuring task / Goal:
For a guideway not only its straightness but also its deviation from the horizontal plane shall be measured. Furthermore it should be determined where and how much should be corrected to adjust the guideway horizontally.

more

FLATNESS MEASUREMENT ON A CIRCULAR SUPPORT OF A TURN TABLE

Measuring task / Goal:
The flatness of a circular support with 2.3m diameter has to be measured.

more

MEASUREMENT OF A CIRCLE ON A ROUND TABLE OF A GRINDING MACHINE

Measuring task / Goal:

The flatness of a rotating table of a grinding machine with a diameter of
3200 mm has to be measured. Thereby only the flatness of a circle has to be measured and not the whole table.

more

MEASUREMENT OF PITCH AND ROLL ON A GRINDING MACHINE

Measuring task / Goal:

On a large surface grinding machine with guide ways with a length of 18m and a distance of 1.3 m pitch and roll have to be checked regularly. The maximum tolerance is 0.1 mm/m.

more

  Catalog Chapter - nivelSWISS-D

  Flyer - nivelSWISS-D

  Manual - nivelSWISS-D


Featured Clients